Tips For Replacing a Window Handle
It is simple to change your window handle in the convenience of your own home. Follow these steps to ensure an elegant and smooth finish.
Start by removing the screw covers to expose the screws within the uPVC window handle. Then measure the spindle length to ensure that you get the right size replacement.
1. Take a measurement of the Spindle Length
When you're replacing a window handle it's important to get the size of the spindle correctly. This is because it will determine how tight or loose the handle is and whether it's able to lock properly in the frame of the window. The spindle is the steel shaft that connects the handle and to the lock within the frame of the window. The spindle can be found in the standard 8mm industry cross-section or the older versions of 9mm. Modern industry standards are 8mm but it wasn't always that way. It is important to check the measurements when buying a new handle.
The easiest method of measuring the length of the spindle is remove the handle that is currently in place This can be accomplished by turning it to the open position, then unscrewing the two screws (which may be hidden behind plastic caps that will require removal) that hold the handle. After door handle repair is removed, measure the distance from the base to the end. This will provide you with the measurements you need to purchase a replacement.
There are a lot of choices when it comes to selecting a new window handle from sleek chrome that can fit into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled monkey tail latches! There are many options to choose from, but the most important thing is to select a style that matches your home's decor.
Espag handles are generally installed to uPVC windows and are always identical in size with 43mm centers (2 fixings). Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza are a different size again since they have an angled blade that functions an interlocking mechanism that is multi-point inside the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized for left or right handed windows. Cranked window handles are only compatible with windows that open in one direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is, you can replace the uPVC handle yourself. All you need are a few basic tools and some time to complete the process.
You must first open the window and then ensure that it's not locked. Next, you need to remove the screws that are holding the handle in place. After the screw caps are removed, you will be able to remove the handle.
The handle itself is fixed to a spindle inside the window frame. The handle is fixed by a pin or a screw according to the type of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are used on casement windows, which includes aluminium windows. The handles can be locked with a key in order to prevent unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will need a flat-bladed screwdriver. After this is released, the handle will slide off the spindle. Once the handle that was previously used is removed, you'll have to take a measurement of the length of the spindle to ensure that the new handle will fit.
Once you have the correct size, you can screw the new handle in the correct position. It is essential to ensure that the handle is securely fastened and rotates in the proper direction (clockwise in the case of an open or counterclockwise if the handle closes). It is essential to make sure that the handle hasn't been installed upside down.
Replace the screw caps. After you've done this you can test the handle to ensure that it is working properly. Also, you should test the locking mechanism by moving the handle until it is locked position and then back again.
3. Remove the Screws
A uPVC handle is an essential component of any house and is the first thing that shows signs of wear or damage. This can be due to natural elements, regular use or even intentional damage by criminals who want to gain access to your home. But, a simple fix can easily solve the problem and stop the problem from occurring again.
UPVC handles may also be difficult to open when the locking mechanism isn't working correctly. Most of the time, the issue can be solved by replacing the multipoint lock rather than the entire handle, and it's certainly worth checking this since it can save you money.
After you've removed the old handle, you will need to remove the screws that held it in place. These are typically located on the inside face of the base of the handle. It may be necessary to use a screwdriver do this. Be careful not to over tighten the handle since this could cause it to become loose.
Then, you'll need to locate the screws or pins that hold the handle in place. Again these are likely to be located on the inside face of the handle base and you will need to use either a screwdriver or pair of pliers in order to remove the screws. If you wish to, you can replace the caps on the screw and test the handle to ensure it works properly.
If you're ready to put in the new handle, simply align the spindle with the cut out in the window mechanism and screw in the appropriate position. If you're looking to replace the screw covers make sure that the handle is in an open position and any screws are securely attached. Once you've completed this, you're done and can enjoy your new window handle. We hope this will allow you to save money on window and door replacements in the future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in a few easy steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll need to finish the job are crucial. Always ensure safety when working with windows and tools. Take your time to follow the steps and make sure that you have the right handle to use.
The first step is to locate the screws holding your existing window handle and remove them, while keeping a safe hold on the handle itself to prevent it from falling and injuring yourself. After the screws have been removed and repositioned, they can be put in a safe spot to be replaced later.
After you have removed the handle, you can begin to put in your new one. The handle needs to be fitted perfectly in order to function correctly and hold the window in its closed position. The next step is to slide the square metal bar to the back of the handle into the hole of your window mechanism, ensuring that it is secure.
The final step is to replace the caps on the screws and test the handle to ensure that it works. If you're not happy with the result or the window doesn't open or close correctly contact our experts for assistance.
The majority of homes in the UK have uPVC windows and as such, many of them will require to be replaced due to damage or wear. The process is relatively straightforward and can be completed by anyone with a little knowledge of DIY. The most crucial aspect to the success of this procedure is ensuring that you're using a handle which matches your window's dimensions and style. If you're not sure about the kind of handle you'll require, don't hesitate to reach out to our team, who can help you navigate the various choices available.